Sanitary Control Valves & Regulators

PRESSURE REDUCING REGULATORS

CA4

CA1

Models CA1 and SA1 are high performance spring-operated, flow-to-open pressure reducing regulators with internal pressure balancing piston- cylinder that provides medium flow capacity and high pressure drop capability. MODEL CA1/SA1

MODEL CA4/SA4

MODEL P2

MODEL P3

The Model P2 is designed for gases with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 1-10 psig (.07-.69 Barg) through 5-500 psig (.69-51.7 Barg). Flow coefficient of 0.02, 0.06, and 0.20 available. This versatile cylinder gas regulator can be ordered with a variety of options to meet your system demands. Standard construction includes a 40 micron integral filter, adjustment knob, and diffusion resistant stainless steel diaphragm. Gauges and CGA fittings are optional.

The Model P3 is designed for gases with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 1-10 (.07-.69 Barg) thru 5-500 psig (.34-34.5 Barg). Flow coefficient of 0.02, 0.06, and 0.20 available. This versatile cylinder gas regulator can be ordered with a variety of options to meet your system demands. Standard construction includes a 40 micron integral filter, adjustment knob, and diffusion resistant stainless steel diaphragm. Gauges and CGA fitting are optional.

Models CA4/SA4 are dome loaded pressure reducing regulators used for "electronic grade" and other ultra high purity fluids. Body sizes: 3/4", 1", 1-1/2", 2" Body materials: Temperature: -20 to 400° F, (-29° C to +204° C)

Body sizes:

Temperature: -20 to 400° F,

IC-ASTM A351, CR CF3M BS-ASTM A479, Tp 316L

Capacity:

SA1

3/4", 1", 1-1/2", 2"

To 18 Cv

(-29° C to +204° C)

Body materials:

Trim:

IC - ASTM A351, Gr. CF3M BS - ASTM A479, Tp. 316L

Capacity:

316L SST

To 18 Cv

Pressure:

SA4

Body size:

Temperature range: -45° to 575° F (-42.7° to 301° C) Pressures: Max Inlet: 3,600 psig (248.2 Barg) Max Outlet: 1-750 psig (.07-51.7 Barg) Options:

Body size:

Temperature range:

Trim:

Inlet to 3000, (206 Barg) Outlet 5-300 psig, (0.34 - 20 barg)

1/4", 3/8", 1/2"

1/4", 3/8", 1/2" Maximum Cv: .02, .06 and .20 Materials:

-45° to 575° F (-42.7° to 301° C)

The Model P2 is a single stage cylinder gas high pressure reducing regulator.

316L SST

Maximum Cv:

Pressures:

Pressure:

.02, .06 and .20

Max Inlet: 3,600 psig (248.2 Barg) Max Outlet: 1-500 psig (.07-34.5 Barg)

Inlet to 3000 psig, (206 Barg) Outlet 5 - 300 psig, (0.34 - 20 barg)

Materials:

MODEL P1

The Model P3 is a two stage

Body/Spring chamber 316L SST/316L SST Brass/6061 AL

cylinder gas high pressure reducing regulator.

The Model P1 is designed for gases and liquids with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 1-10 psig (.07-.69 Barg) thru 10-750 psig (.69-51.7 Barg). Flow coefficient of 0.02, 0.06, and 0.20 available. This versatile point of use regulator can be ordered with a variety of options to meet your system demands. Standard construction includes a 40 micron integral filter, adjustment knob, and diffusion resistant stainless steel diaphragm. Body sizes: 1/4", 3/8", 1/2" Maximum Cv: .02, .06 and .20 Materials: Body/Spring chamber 316L SST/316L SST Brass/6061 AL End connections: FNPT, Tube End, Tri-Clamp Temperature range: -45° to 575° F, (-42.7° to 301° C) Pressures: Max Inlet: 3,600 psig, (248.2 Barg) Max Outlet: 1-750 psig, (.07-51.7 Barg) Options: Relief Valve

Options:

End connections: FNPT

Model 5381 Pressure Reducing Regulator is ideally suited for clean gas, clean liquid, and clean steam applications. It can handle inlet pressures up to 600 psig and maintain outlet pressure from 5 to 200 psig. To minimize sanitation problems associated with porosity and welds, Model 5381 is machined from 316L SST barstock, polished to a 32 micro-inch Ra finish internally, and electro-polished. MODEL 5381

Packed Valve, Diaphragm Valve

End connections: FNPT

Packed Valve, Diaphragm Valve

CGA End Connection

MODEL P4 The Model P4 is designed for gases with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 1-10 psig (.07-.69 Barg) through 5-500 psig, (.34-34.4 Barg). Flow coefficient of .6 Cv available. This versatile point of use regulator can be ordered with a variety of options to meet your system demands. Standard construction includes a 40 micron integral filter, adjustment knob, and diffusion resistant stainless steel diaphragm.

MODEL P5

The Model P5 is a piston designed regulator for gases and liquids with inlet pressures up to 3600 psig (248 Barg). Standard adjustable outlet ranges from 50-1500 psig (3.4-103 Barg). Flow coefficient of 0.06. This general purpose use regulator can be ordered with a variety of options to meet your system demands. Standard construction includes a 40 micron integral filter, adjustment knob, and diffusion resistant stainless steel diaphragm.

Body size: 1/2" Body material:

Temperature:

The Model P1 is a single stage high pressure reducing regulator.

To 400° F, (204° C)

Capacity:

Body sizes: 3/8", 1/2" Maximum Cv: .6 Materials: Body/Spring chamber 316L SST/316L SST Brass/6061 AL End connections: FNPT, Tube End, Tri-Clamp

Temperature range: -45° to 275° F (-42.7° to 135° C) Pressures: Max Inlet: 3,600 psig (248.2 Barg) Max Outlet: 5-500 psig (.34-34.4 Barg) Options: Relief Valve

Body size:

Temperature range:

316L SST barstock

To 0.5 Cv

1/4", 3/8", 1/2"

-55° to 300° F (-48° to 149° C)

Trim:

Maximum Cv: .06 Materials:

Pressures:

The Model 5381 is a pressure reducing regulator.

Diaphragm - 302 SST or EPDM Seat - 316 SST or TFE

Max Inlet: 3,600 psig (248.2 Barg) Max Outlet: 50-1,500 psig (3.4-103 Barg)

Pressure:

Body/Spring chamber 316L SST/316L SST

Options:

Inlet to 600 psig, (41 barg ) Outlet to 200 psig, (13 barg)

The Model P4 is a balanced pressure reducing regulator.

Mounting Bracket, Panel Mount

End connections: NPT